Bdi 8927 AVION Manuel d'utilisateur télécharger pdf (Page 4)

a s s e m b l y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

Step 7

Optional fabric speaker or glass insert panel

Avion’s drawer and door fronts feature removable/replaceable panel

inserts to permit customization of your cabinet’s appearance and utility.

(Contact BDI Customer Service at [email protected])

Installing optional panel inserts is quick and easy:

1. From the inside of the door, and starting at one corner of the

pre-installed Glass or Speaker panel insert, carefully pull away all four

sections of the panel retention trim, running along the perimeter of the

insert. (Use a blunt, tapered object or your finger to start removing the

rubber material.)

2. Once the trim material is completely pulled away, remove the pre-

installed panel insert and replace it with the desired panel insert.

3. Re-install the trim, pressing it carefully back into the groove around

the new panel insert, section by section, to complete the panel insert

installation.

Step 8

Center channel speaker option

If you decide to use your top/center drawer area for a center channel

speaker, the drawer may be easily removed. In order to do this, follow

the steps below.

Step 9

Option: Removing Center Drawer Divider

Remove Center Drawer Divider by lifting Divider straight up.

Drawer Divider Pins can be removed by hand.

a. Remove rubber trim and

glass panel.

b. Replace insert panel

Fully extend drawer and locate plastic lever

on drawer slide.

Simultaneously on the LEFT side of drawer, lift UP on plastic lever AND on the RIGHT

side of drawer, push DOWN on plastic lever and pull STRAIGHT OUT the entire drawer

assembly. Remove drawer slides from interior side panels using a Phillips screwdriver.

1 2 3 4 5

Pas de commentaire

Bdi 8927 AVION Manuel d'utilisateur Page 4